The file 窶弯0窶 on the disk 窶慊･窶 is too large to accommodate the installation. The installation cannot continue. Try removing 窶弯0窶 and installing again.
Dear Script Developer,
This version of Installer no longer supports installing font resources using the 'inra' script resource.
Please use the 'inff' script resource to install or remove font resources.
The Installer tried to quit all other running applications, but this was cancelled. Therefore, installation was cancelled, leaving the disk 窶慊･窶 untouched.
The Installer document 窶弯0窶 requires version ^1 of the Installer application. Try opening the Installer application that is in the same folder as this Installer document.
An error occurred while removing from the active startup disk 窶慊･窶. Removal was not able to be completed, but your original software has been restored.
The files needed for this installation could not be found on your server volume 窶弯0窶. Please contact your network administrator about this problem.
The Installer cannot be opened from this disk. Click Quit, then open a copy of the Installer from a disk that supports the hierarchical file system.
Problems were encountered installing onto the disk 窶慊･窶. Please quit the Installer, restart your Macintosh and try running the Installer again.
It is not possible to print an Installer document. Open this document to do an installation.
This copy of the Installer seems to be damaged. Make sure you are using the original Installer disks.
The file named 窶弯0窶 on the disk 窶慊･窶 is damaged and cannot be repaired by the Installer. Please quit the Installer, delete this file, and try again.
^0 cannot run on your version of Macintosh Software. Please restart your Macintosh using your original set of distribution disks. Click Quit to leave the Installer.
The Installer found an alias named 窶弯0窶 but could not find the original Installer document to which this alias points. Make sure you are using the original Installer disks.
Removal from the active startup disk 窶慊･窶 was successful. You must now restart your Macintosh.
Please wait while the Installer gets ready to continue窶ｦ
The Installer needs to modify the file named 窶弯0窶 on the disk 窶慊･窶 but that file is locked. Please quit the Installer, unlock the file and try again.
The Installer needs to create a folder named 窶弯0窶 on the disk 窶慊･窶 but a file with this name already exists.
Please rename this file or move it to another folder.
An error occurred while installing on the active startup disk 窶慊･窶. Installation was not able to be completed, but your original software has been restored.
That disk is unreadable.
An error occurred while trying to complete the installation on 窶慊･窶. There may be problems with 窶慊･窶.
An error occurred while installing on the active startup disk 窶慊･窶. 窶慊･窶 may not be a usable startup disk. (Error #^0)
An error occurred while installing on the active startup disk 窶慊･窶. Installation was cancelled, leaving the disk 窶慊･窶 untouched.
There is not enough space on the active startup disk 窶慊･窶 to do this installation (^0K available).
To install on the current startup disk you will need ^1K free. If you startup with a different disk, you will need ^2K free to install on 窶慊･窶.
Installation on the active startup disk 窶慊･窶 cannot take place while other applications are running. Click Continue to automatically quit all other running applications. Click Cancel to leave the disk 窶慊･窶 untouched.
Installation on the active startup disk 窶慊･窶 cannot take place while other applications are running. Quit the Installer, then quit all running applications, and then try again.
Installation on the active startup disk 窶慊･窶 cannot take place while another application is running. Quit the Installer, then quit 窶弯0窶, and then try again.
Installation on the active startup disk 窶慊･窶 was successful. You must now restart your Macintosh to use your new software.
Stopping now may result in an incomplete set of software on 窶慊･窶. Click Resume to continue the installation or Stop if you are sure you want to stop.
An error occurred while reading or writing the file 窶弯0窶 on 窶慊･窶. No installation can take place. (Error #^1)
An error occurred while reading or writing the file 窶弯0窶 on 窶慊･窶. Installation cannot continue. The disk 窶慊･窶 may not be a usable startup disk. (Error #^1)
An error occurred while reading the file 窶弯0窶 on 窶弯1窶. No installation can take place. Make sure you are using the original Installer disks. (Error #^2)
An error occurred while reading the file 窶弯0窶 on 窶弯1窶. Installation cannot continue. The disk 窶慊･窶 may not be a usable startup disk. Make sure you are using the original Installer disks. (Error #^2)
There's a problem with the disk 窶慊･窶. No installation can take place. (Error #^0)
The Installer cannot copy the file 窶弯0窶 onto the disk 窶慊･窶. Installation cannot continue. Please delete this file and try running the Installer again.
There's a problem with the source disk 窶弯0窶. No installation can take place. Make sure you are using the original Installer disks. (Error #^1)
There's a problem with the source disk 窶弯0窶. Installation cannot continue. The disk 窶慊･窶 may not be a usable startup disk. Make sure you are using the original Installer disks. (Error #^1)
The Installer document 窶弯0窶 is damaged. Make sure you are using the original Installer disks and try again.
This is not the correct 窶弯0窶 disk. Make sure you are using the original Installer disks and try again. Click Continue if you have the correct disk to insert. Click Stop to stop any further installation.
The file 窶弯0窶 on disk 窶慊･窶 cannot be replaced by the Installer. No installation will take place. Quit the Installer, move the file to another folder and try again.
窶弯0窶 has the correct name but is not the correct disk. Click Continue, then try inserting a different disk with this name. Or click Stop to stop any further installation.
No installation was necessary on 窶慊･窶.
The Installer did not find any Installer documents and cannot run without one.
Installation was stopped before it was completed. The disk 窶慊･窶 may not be a usable startup disk.
Error copying desk accessory onto 窶慊･窶. Installation cannot continue. The disk 窶慊･窶 may not be a usable startup disk.
The file 窶弯0窶 already on 窶慊･窶 is newer than what you are about to install. Click Newer to keep the newer file, Older to replace that file, or Cancel to leave the disk 窶慊･窶 untouched.
The Installer found ^0 Installer documents on the disk 窶弯1窶. Please open the specific document you wish to use.
Some of the files on the disk 窶弯0窶 do not meet requirements specified by the Installer document 窶弯1窶. Installation cannot continue. The disk 窶慊･窶 may not be a usable startup disk. Make sure you are using the original Installer disks.
Cannot overwrite a protected resource on the disk 窶慊･窶. Error detected before installation began.
Error occurred while writing the boot blocks. 窶慊･窶 may not be a usable startup disk. (Error #^0)
System Software is required for this installation but is not present on 窶慊･窶. Click OK, then install System Software before or as part of this installation.
A file is missing from 窶慊･窶 but is required for this installation. Quit the Installer and check your manual to see what files are required and how to get these files.
The file 窶弯0窶 is missing on 窶慊･窶 but is required for this installation. Quit the Installer and check your manual to see how to get that file.
There were files missing on 窶慊･窶 that are required for this installation. Quit the Installer and check your manual to see what is required.
There are too many desk accessories on 窶慊･窶 to complete this installation. Installation would result in ^0 desk accessories; only ^1 are allowed. Please quit the Installer, remove some desk accessories, and try again.
There was nothing to remove from 窶慊･窶.
窶弯0窶 is the wrong disk. To finish the installation, click Continue and insert 窶弯1窶. To stop any further installation, click Stop.
Installation was cancelled, leaving the disk 窶慊･窶 untouched.
The file 窶弯0窶 already on 窶慊･窶 is more recent than what you are about to install. Click Continue to replace 窶弯0窶 with the older version. Click Cancel to leave the disk 窶慊･窶 untouched.
The file 窶弯0窶 on 窶慊･窶 does not meet the requirements specified by the Installer document 窶弯1窶. Installation cannot be completed. You may want to quit the Installer, remove 窶弯0窶 and try again.
There is not enough space on the disk 窶慊･窶 to complete the installation (^0K needed, ^1K available). Quit the Installer, remove some items from the disk 窶慊･窶, and try again. Or try installing on another disk.
There is something wrong with the selected disk 窶慊･窶 . An error occurred before installation began. You may want to try installing on a different disk or Quit to exit the Installer.
The Installer document 窶弯0窶 is unusable for installation. The installation cannot be completed. The disk 窶慊･窶 may not be a usable startup disk. Make sure you are using the original Installer disks.
The Installer document 窶弯0窶 is unusable for installation. An error was detected before installation began. Make sure you are using the original Installer disks.
^0 cannot run on this model of Macintosh. Please contact your authorized Apple dealer and inquire about upgrading your hardware. Click Quit to leave the Installer.
Removal from 窶慊･窶 was successful. If you are finished, click Quit to leave the Installer. If you wish to do additional installations or removals, click Continue.
Installation on 窶慊･窶 was successful. If you are finished, click Quit to leave the Installer. If you wish to do additional installations, click Continue.
The selected disk is too full. Please quit the Installer and remove some files you no longer need.
There are too many files open on your Macintosh. Please quit the Installer, quit any other applications you may be running, and try again.
The disk is locked.
One of your disks is no longer available. Please quit the Installer, restart your Macintosh, and try running the Installer again.
A necessary file is locked. Installation cannot continue.
A problem occurred with the AppleTalk network. Please quit the Installer, restart your Macintosh, and try running the Installer again.
The Installer needs more memory to perform an installation. Try quitting other applications and running the Installer again. You could also try removing some system extensions and restarting to make more memory available.
An AppleShare volume has unexpectedly disappeared and installation cannot be continued.
A disk error has occurred and installation cannot continue. Your disk may be damaged.
You do not have the necessary privileges to access all of the files needed on the server. Contact your AppleShare administrator.
A needed file is already in use or was left open.
There has been a problem with the file server. Perhaps you do not have the necessary privileges. Check with your network administrator.
